Heat Exchanger Refresh Kit - 1963-79 - Type 1 Engines

Aluminium corrugted air hose fitted from the fanshroud to the heat exchanger on Type 1, 1200cc – 1600cc engines.

Also can be used where any 50mm ID air hose is required.

Quality: Top quality

Quantity: Sold each, 2 required per engine

Measurements: 500mm x 50mm

Fitting: 1 x 500mm is only long enough to fit one side of the fan shroud to heat exhanger, 2 required per engine, 3 if you have the pre heat hose installed that runs from the air filter housing to the tin over exhaust

Applications:

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1960 – 1974

VW Type 3: 1961 – 1973

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1960 – 1979

Jubilee style clip 40-60mm

Heater muffler rubber seal for sealing the heat exchanger to the heater muffler.

Sold Separately

This collar inserts into a standard exhaust on all aircooled VW Beetles, Karmann Ghia`s, Splitscreen and Baywindow Campervans with 1200cc, 1300cc, 1500cc or 1600cc engines.

Once installed it allows you to fit the airhose from the fanhouse to the exhaust pod which transfers the air into the heat exchanger.

NOTE: This item is sold EACH. Two are needed per vehicle.

This clamp fits onto the end of the heat exchanger where it meets the air hose. It clamps the exhaust heating boxes onto the heat exchanger  

Quality: Reproduction

Quantity: Sold each, 2 required 

Applications: 

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Baywindow Van: 1968 – 1979

VW Type 3: 1961 – 1973

VW Karmann Ghia: 1960 – 1974

Thick style rubber seal that sits around the bottom of the air hose on the tinware over the exhaust on all 1200cc to 1600cc based engines 

Quality: Genuine Volkswagen 

Quantity: Sold each

Fitting: 2 required per engine

Applications:

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1960 – 1974

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1960 – 1979

Left hand side heat exchanger fitting kit required to connect the heater cables to the heat exchangers on all VW Beetles and Karmann Ghia`s from 1963 onwards with 1200cc, 1300cc, 1500cc and 1600cc Type 1 Engines

Once connected the cables (sold separately) will then opperate the flaps inside the heat exchangers and allow the heat to transfer into the car

Quality: Good quality

Fitment: Left hand side, for the right hand side see part number 043298148A

Applications:

VW Beetle: 1963 – 1979

VW Splitscreen Van: 1963 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1963 – 1974

VW Buggy + Baja: 1963 – 1979

Right hand side heat exchanger fitting kit required to connect the heater cables to the heat exchangers on all VW Beetles and Karmann Ghia`s from 1963 onwards with 1200cc, 1300cc, 1500cc and 1600cc Type 1 Engines

Once connected the cables (sold separately) will then opperate the flaps inside the heat exchangers and allow the heat to transfer into the car

Quality: Good quality

Fitment: Right hand side, for the right hand side see part number 043298147A

Applications:

VW Beetle: 1963 – 1979

VW Splitscreen Van: 1963 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1963 – 1974

VW Buggy + Baja: 1963 – 1979