VW Beetle Aperture Seal Kit 1967-79 (NOT 1302 + 1303 Models)

Replacement bonnet aperture seal for Volkswagen Beetle models from 1961 onwards. This seal fits around the body aperture and is retained beneath the metal retaining strip around the bonnet opening, providing a weatherproof seal between the bonnet and body.

Over time original bonnet seals become hard, flattened or perish, allowing water, dust and air to enter the luggage compartment. A worn seal can also cause bonnet rattles and poor panel fitment. Replacing the seal restores the correct fit, helps protect the front luggage area from water ingress and improves overall refinement.

Manufactured from high-quality rubber for long service life and an OE-style fit.

Quantity:

• Sold individually

Fitting Position:

• Front bonnet aperture
• Body mounted

Applications:

Aircooled VW Beetle Mk1 (Type 1 Standard):
1200, 1300, 1500 & 1600 models (1961-1979)

Aircooled VW Beetle 1302:
1300 & 1600 models (1970-1972)

Important:

• Not suitable for VW Beetle 1303 models
• For 1303 models use part number 133823731

Additional Information:

• Fits under the original metal retaining strip
• Helps prevent water and dust ingress
• Improves bonnet fit and reduces rattles
• OE-style replacement seal

Recommended Additional Parts:

• Bonnet seal retaining strip
• Bonnet release cable
• Bonnet release handle
• Spare wheel well seal components

This reproduction-quality left-hand door seal is designed to fit VW Beetles built from 1967 to 1979, excluding Cabriolet (convertible) models. Engineered to match the original profile and length, this rubber seal fits snugly into the channel running around the perimeter of the passenger-side door frame, forming a tight seal against water, wind, and road noise.

Over time, original door seals often become cracked, brittle, or compressed, leading to poor sealing and uncomfortable drafts or leaks. This replacement restores a snug fit, helping to maintain a quieter cabin, better temperature control, and protection from the elements.

The seal should be installed into the factory channel in the doorframe and secured using a quality contact adhesive for best results. Trimming may be required for a perfect fit depending on body condition or previous modifications.

Specifications:

• Side: Left (Passenger’s side on RHD vehicles)

• Material: Reproduction rubber

• Fitment: Fits into door perimeter channel

• Adhesive Required: Yes (contact adhesive recommended)

• Excludes: Cabriolet/Convertible Beetles

Vehicle Compatibility:

• VW Beetle (Saloon/Standard): 1967–1979
  (Not suitable for Cabriolet models)

Fitting Notes:
Ensure the seal is cleanly seated in the perimeter channel with even tension. Use contact adhesive sparingly to avoid excess squeeze-out. For best results, install on a clean, dry surface and allow adequate cure time before closing the door.

This reproduction right-hand door seal is a direct replacement for VW Beetles manufactured between 1967 and 1979, excluding Cabriolet (convertible) models. Designed to fit snugly into the channel around the drivers-side door frame, this seal helps block out wind noise, water, and dust while restoring the comfort and weatherproofing of your classic Beetle.

Made from high-quality reproduction rubber, the seal matches the original design for an accurate fit and function. Over the years, door seals can wear down, crack, or become misshapen, leading to drafts and leaks—this replacement ensures your door closes firmly with a proper seal.

Installation is straightforward: the seal fits into the perimeter channel of the door and should be secured using contact adhesive for best results. Be sure to test door closure and adjust fitment as needed once installed.

Specifications:

• Side: Right (Drivers side on RHD vehicles)

• Material: Reproduction rubber

• Fitment: Installs into the factory channel around the door perimeter

• Adhesive Required: Yes (contact adhesive recommended)

• Excludes: Cabriolet/Convertible Beetles

Vehicle Compatibility:

• VW Beetle (Saloon/Standard): 1967–1979
  (Not compatible with Cabriolet models)

Fitting Notes:
Ensure the surface is clean and dry before installation. Apply adhesive in small sections and seat the seal evenly into the channel. Allow sufficient curing time before using the door to ensure long-lasting adhesion.

This replacement rubber seal is designed to fit the deck lid (rear engine lid) on all VW Beetle models from 1960 to 1979. Manufactured from durable, weather-resistant rubber, this seal ensures a tight, secure fit between the engine lid and the body, helping to keep dust, water, and engine fumes out of the engine bay and luggage compartment area.

A properly sealing deck lid is essential for protecting your engine and maintaining the overall cleanliness and performance of your classic Beetle. Over time, original seals can become brittle, cracked, or compressed—leading to leaks and poor alignment. This quality reproduction seal is an ideal solution for restorations or preventative maintenance.

Installation is straightforward and typically involves pressing the seal into the channel around the rear body edge. The rubber is pliable enough to conform to the shape of the lid while providing a snug, weatherproof seal.

Applications:

• VW Beetle: 1960–1979
  (Fits all standard Beetle models with rear engine lids)