Thermostat and Flaps

Aftermarket air flap thermostat for use on all 1200cc to 1600cc upright VW aircooled engines This thermostat differs from the original...

Thermostat bracket to fit all Type 1 aircooled 1200cc – 1600cc engines Quality: Good quality    Fitment: Type 1 engines only  Applications: VW...

Second hand thermostat bracket to fit all Type 1 aircooled 1200cc – 1600cc engines Please note image pictured is of a...

Strong spring that attaches to fanhouse and cooling flap assembly insuring proper operation of your cooling system to fit 1200cc-1600cc Type 1 aircooled engines

Genuine Volkswagen pushrod that attaches the thermostat to the flaps inside the fanshroud on all 1200cc to 1600cc Beetles, Buses and Karmann Ghia models

Fanshroud cooling flap linkage spring to fit Type 1 engines and Baywindow pedal linkages from 1968 - 1972

This 8mm nut can be used for various applications including: T25 1.9 and 2.1 metal elbow to rear of Right hand side cylinder...

This 6mm washer is 1.6mm thick and has an outside diameter of 11mm.  It can be used for various applications...

General Flat 8mm Washer 9.5mm ID x 17mm OD x 1mm

Lock Washer used for the following:

Used for the cooling assembly (flaps) on VW Aircooled Type 1 engines.

Used for holding the clutch cable assembly pedal end on Type 25 Buses manufactured before 1985

Used in the accelerator pedal assembly on Baywindow buses from 1973 to 1975 (5 required)