Exhaust Gaskets

Gasket to fit between the exhaust and the cylinder head.

Replacement gasket for the heat risers on all Beetle and Bus 1200-1600cc engines with single hotspot exhausts. Single hotspot means that...

Replacement pre heat pipe gasket that has 2 pre heat holes only found on "AR" engine codes

Replacement tail pipe gasket which seals the tail pipe to the exhaust on all standard VW Baywindow vans which have Type 4 1700cc, 1800cc or 2000cc engines.

This gasket is used to seal the exhaust muffler to the heat exchanger on all 1700cc to 2000cc Type 4 engines fitted to Baywindow Buses and also Type 25 or T3 buses with aircooled and waterboxer engines manufactured up to 1985.

Replacement oval copper exhaust gasket used on 1700cc, 1800cc and 2000cc Type 4 engines fitted into Baywindow Buses from 1972 to...

Replacement cylinder head to heat exchanger gasket for use on cylinders 1 and 4 (straight holes) on 2000cc Type 4 aircooled engines fitted into late Baywindow buses from 1978 to 1979 with engine code CU and CV.

Replacement cylinder head to heat exchanger gasket for use on cylinders 2 and 3 (offset holes) on 2000cc Type 4 aircooled engines fitted into late Baywindow buses from 1978 to 1979 with engine code CU and CV.

Covers heat riser flanges when intake heat riser is not used. A must when installing twin carb kits. Sold in pairs. May...

End worn or blown out gaskets forever with these new re-usable copper gaskets. Ensure a true positive seal each and every...