Type 1 Engine Pulley Kit

Replacement pulley adjustment shim for use on all dynamo and alternator pulleys that adjust the tension on the fan belt by simply moving the shims from between the two pulley halves to the outside between the pulley and the pulley nut

Quality: Standard reproduction 

Quantity: Sold each  

Fitment: The more shims removed from the middle of the pulley the tighter the belt will become 

Fitting: 10 should be used in total

Applications:

VW Beetle: 1949 – 1979

VW Splitscreen Van: 1950 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1955 – 1974

VW Type 3: 1961 – 1973

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1949 – 1979

Replacement fan belt for all aircooled Type 1 engines from 30hp or 1200cc – 1600cc fitted with a Dynamo charging system

Also suitable for Type 1 1200cc – 1600cc engines that have had an Alternator conversion

Quality: Good quality

Measurements: 905mm x 9.5mm

Applications:

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Baywindow Van: 1968 – 1973

VW Karmann Ghia: 1960 – 1974

VW Trekker: 1968 – 1973

VW Buggy + Baja: 1960 – 1979

Standard top pulley nut to fit all type 1 engine alternator and dynamo top pulleys

Quality: Reproduction

Measurements: M12, 1.5mm with a 21mm head

Applications:

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1968 – 1974

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1960 – 1979

Standard replacement dynamo or alternator pulley nut washer  

Quality: Reproduction

Quantity: Sold each 

Fitment: Dynamo or Alternator pulley

Applications:

VW Beetle: 1949 – 1979

VW Splitscreen Van: 1950 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1955 – 1974

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1949 – 1979

Dynamo / Alternator Woodruff Key.

New woodruff key to fit all dynamos and alternators both at the fan and pulley end.

Sold Separately.

Replacement pulley bolt washer for the front pulley retaining bolt.

This washer fits all aircooled engines from 25hp to 1600cc and watercooled engines fitted to Type 25 or T3 buses from 1983 to 1992

Quality: Good quality reproduction

Applications:

VW Beetle: 1949 – 1979

VW Splitscreen Van: 1950 – 1967

VW Baywindow Van: 1968 – 1979

VW Type 25 or T3: 1983 – 1992

VW Karmann Ghia: 1955 – 1974

VW Type 3: 1961 – 1973

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1949 – 1979

This crankshaft bolt is used on all aircooled engines from 25hp to 1600cc to attach the crankshaft pulley onto the end of the crankshaft

Quality: Good quality reproduction

Fitting: If you require the washer that goes onto this bolt, see part number 111105259

Applications:

VW Beetle: 1949 – 1979

VW Splitscreen Van: 1950 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1955 – 1974

VW Type 3: 1961 – 1973

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1949 – 1979

Standard replacement crankshaft pulley as fitted to Type 1 aircooled engines on Beetles, Karmann Ghias, Baywindow and Splitscreen Buses.

Quality: Reproduction

Measurements: 175mm

Fitting: Pulley bolt and washer supplied separately, see part numbers 111105263A and 111105259

Applications:

VW Beetle: 1963 – 1979

VW Splitscreen Van: 1963 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1963 – 1974

VW Buggy + Baja: 1963 – 1979

Top quality standard top pulley is designed to replace the original fitted to your 12 volt dynamo or alternator set up on your Type 1 aircooled 1200cc to 1600cc engine.

Quality: Top quality reproduction

Bundle Kit: We also sell a pulley kit, that comes with pulley, washer, nut, shims and a woodruff key, see part number 043903109KIT

Applications:

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1960 – 1974

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1960 – 1979