https://images.ca.khaos-cdn.net/2019%20Images/2019%20Website%20Images/SPA102B_MB_1200%20x%201200_WM_FBK_Q90_V1/SPA102B_MB_1200%20x%201200_WM_FBK_Q90_V1_01.jpg?w=400&h=400
**NCA** Beetle Adjustable Spring Plates - 1961-79 - Swing Axle Models - 2" Drop
Part Number: SPA102B
Call for Lead Time
These adjustable spring plates can be mounted onto 1961 onwards Swing Axle model rear suspension Beetles and Karmann Ghia`s which have the short torsion bars.
Sold in pairs these spring plates have been designed and manufactured here in the UK.
Features include:
- Manufactured with a 2″ drop built into them. By bolting these plates on they will automatically lower the rear of your car by 2″ without turning the splines, allowing a further adjustment of up to 2 and half inches, lowering the rear of the Beetle by up to 4 and a half inches in total.
- Manufactured slightly longer than the standard plate allowing you to lower the rear of your car and still be able to get the correct wheel alignment and geometry.
- Fully adjustable spring plate allowing you to level the rear of your car up equally.
- Supplied complete with inner and outer torsion arm grommets.
- Manufactured in the UK
Supplied with 2 x inner and 2 x outer torsion bar bushes.
Note on the Finish
The finish is black zinc passivate.
This is a rust preventative finish which is ideal as a paint undercoat.
Fitted as is they will corrode eventually going a powder white colour, which is the zinc corroding and is to be expected.
https://www.coolairvw.co.uk/product/spa102b/