**NCA** Beetle Adjustable Spring Plates - 1961-79 - Swing Axle Models - 1" Drop

These adjustable spring plates can be mounted onto 1961 onwards Swing Axle model rear suspension Beetles and Karmann Ghia`s which have the short torsion bars.

Sold in pairs these spring plates have been designed and manufactured here in the UK.

Features include:

• Manufactured with a 1″ drop built into them.  By bolting these plates on they will automatically lower the rear of your car by 1″ without turning the splines, allowing a further adjustment of up to 2 and half inches, lowering the rear of the Beetle by up to 3 and a half inches in total.
• Manufactured slightly longer than the standard plate allowing you to lower the rear of your car and still be able to get the correct wheel alignment and geometry.
• Fully adjustable spring plate allowing you to level the rear of your car up equally.
• Supplied complete with inner and outer torsion arm grommets.
• Manufactured in the UK

Supplied with 2 x inner and 2 x outer torsion bar bushes.

Note on the Finish

The finish is black zinc passivate.

This is a rust preventative finish which is ideal as a paint undercoat.

Fitted as is they will corrode eventually going a powder white colour, which is the zinc corroding and is to be expected.