https://images.ca.khaos-cdn.net/2019%20Images/2019%20Website%20Images/SPA101B_MB_1200%20x%201200_WM_FBK_Q90_V1/SPA101B_MB_1200%20x%201200_WM_FBK_Q90_V1_01.jpg?w=400&h=400
**NCA** Beetle Adjustable Spring Plates - 1953-60 - 2" Drop
Part Number: SPA101B
Call for Lead Time
These adjustable spring plates can be mounted onto all Beetles from 1952 to 1960 and all Karmann Ghia`s from 1955 to 1960.
Sold in pairs these spring plates have been designed and manufactured here in the UK.
Features include:
- Manufactured with a 2″ drop built into them. By bolting these plates on they will automatically lower the rear of your car by 2″ without turning the splines, allowing a further adjustment of up to 2 and half inches, lowering the rear of the Beetle by up to 4 and a half inches in total.
- Manufactured slightly longer than the standard plate allowing you to lower the rear of your car and still be able to get the correct wheel alignment and geometry.
- Fully adjustable spring plate allowing you to level the rear of your car up equally.
- Supplied complete with inner torsion arm grommet (please note that slight modification may be required to the grommet when installing on your Pre 1960 VW).
- Manufactured in the UK
Supplied with 2 x inner torsion bar bushes.
Note on the Finish
The finish is black zinc passivate.
This is a rust preventative finish which is ideal as a paint undercoat.
Fitted as is they will corrode eventually going a powder white colour, which is the zinc corroding and is to be expected.
https://www.coolairvw.co.uk/product/spa101b/