**NCA** Beetle Adjustable Spring Plate Kit - 1953-60 - 1" Drop

Original style torsion bar cover for use on all Beetles manufactured from November 1952 to August 1959.

Sold as a pair these reproduction covers are manufactured to a high quality meaning that you can now replace your original rusty covers for a perfect reproduction without any modification.

Quality: Top quality

Quantity: Sold as a pair 

Applications:

VW Beetle: 1952-1959

Spring Washer M10

Used for various things of which some are listed below:

• Washer for pinch bolt N01-044-57
• Locking washer anti roll bar mount 10mm – T1 Beetle 8/73>, chassis 134 2000 001
• Washer locking steering rack mountBeetle 1303 75>
• Washer locking spring plate cover to chassis – Beetle
• Washer drum brake back plate rear – Beetle
• Washer anti roll bar mount – Bay
• Washer steering box mount – Bay
• Washer front wheel cylinder to backing plate – Bay
• Washer end of accelerator pedal shaft RHD – Bay
• Washer rear brake cylinder to back plate – Split
• Washer for horn & front indicator – T4
• Washer for engine mounts, exhaust front pipe, horn – Mk1 Golf/Jetta

This 10mm bolt is 20mm long and has a 1.5mm thread pitch.  It is used for various applications including:

• Beetle spring plate cover to chassis bolt
• Baywindow Bus (68-72) bumper iron to chassis bolt
• Splitscreen Bus torsion bar cover bolt

These adjustable spring plates can be mounted onto all Beetles from 1952 to 1960 and all Karmann Ghia`s from 1955 to 1960.

Sold in pairs these spring plates have been designed and manufactured here in the UK.

Features include:

• Manufactured with a 1″ drop built into them.  By bolting these plates on they will automatically lower the rear of your car by 1″ without turning the splines, allowing a further adjustment of up to 2 and half inches, lowering the rear of the Beetle by up to 3 and a half inches in total.
• Manufactured slightly longer than the standard plate allowing you to lower the rear of your car and still be able to get the correct wheel alignment and geometry.
• Fully adjustable spring plate allowing you to level the rear of your car up equally.
• Supplied complete with torsion arm grommets (please note that slight modification may be required to the grommet when installing on your Pre 1960 VW).
• Manufactured in the UK

Note on the Finish

The finish is black zinc passivate.

This is a rust preventative finish which is ideal as a paint undercoat.

Fitted as is they will corrode eventually going a powder white colour, which is the zinc corroding and is to be expected.