Baywindow Bus Rear Engine Brace Fitting Kit - 1972-79 - Type 1 Engines

This 8mm self locking nut can be used for various applications including:

• T1 steering column clamp nut
• T1 steering coupling nut
• T1 lower steering flange nut
• 1303 -1973 strut top mount nut (chassis >133-3200-000)
• 1302 and 1303 steering UJ clamp nut
• 1303 75-79 steering rack mount nut
• T1 68-79 bottom rear anti roll bar pushrod nut
• T2 72-79 1600cc rear engine brace vertical bolt nut
• T2 68-79 steering box flange nut
• T2 68-79 upper flange to steering coupling nut
• T25 rear engine brace mounting nut (petrol engines)
• T25 85-92 cast elbow to silencer pipe & cross pipes nut (waterboxer)
• T25 down pipe to manifold nut (diesel)
• T25 steering rack to chassis nut
• T25 steering column clamps, flanges and couplings nut
• T25 83-92 gear shift shaft to gearbox lever nut
• Mark 1 Golf fuel tank strap nut

This rubber mount fixes to the end of the engine support bar at the rear of the vehicle. The mount then attaches to the bodywork holding the engine in position.

Fits all Baywindow Buses from 1972 to 1979 (removable rear valance) fitted with a Type 1 engine.

Quality: Good quality reproduction

Quantity: Sold each, 2 required per engine

Applications:

VW Baywindow Van: 1972 – 1979

This 8mm bolt is 42mm long, with a 13mm head and a 1.25mm thread pitch. it has a tensile strength of 10.9.  It can be used for various applications including:

• T2 73-79 1600cc rear engine brace bolt (Vertical)
• T25 steering column clamp bolt

This 8mm bolt is 70mm long, with a 13mm head and a 1.25mm thread pitch.  It has a tensile strength of 10.9.  It can be used for various applications including:

• T2 68-79 1600cc rear engine brace centre mount bolt

M10 Bolt

Dimensions + Measurements:

• 40mm long
• 17mm head
• 1.5mm thread pitch
• 8.8 Tensile strength

Quality: Reproduction

Quantity: Sold each 

Fitment: Various applications including:

• T2 rear engine brace to crankcase bolt

Nut, self locking M10

M10 Shank Bolt

Dimensions + Measurements:

• 75mm long
• 16mm head
• 1.5mm thread pitch
• 10.9 Tensile strength

Quality: Reproduction

Quantity: Sold each 

Fitment: Various applications including:

• T2 72-79 1600cc rear engine brace horizontal mounting bolt. (chassis to engine mount bolt)
• Mark 2 Golf Lower rear shock bolt