Beetle Stainless Steel Blade Bumper Kit

This 8mm full nut has a 1.25mm thread pitch and a 13mm head.  It can be used for various applications including:

• T1 general use nut
• 1303 74-79 ball joint clamp nut (chassis 134 2000 001)
• T1 68-79 rear anti roll bar bracket nut
• T2 Front beam steering stop nut
• T2 68-79 brake pedal to lever arm nut
• T2 68-72 bumper bolt nut
• T2 68-79 sliding door centre hinge cam nut
• T2 -67 general use nut
• T25 1600cc (CT) rocker shaft mounting block nut
• T25 camshaft pillars cylinder head nut (diesel)
• T25 silencer mount nut (diesel)
• T25 gear shift shaft plate nut
• T25 83-92 front gear shift rod to universal joint clamp nut
• T25 79-84 Nut above operating cam centre hinge sliding door
• Mark 1 Golf bumper iron nut (to metal bumper)

This bracket bolts to the vehicle and protrudes out through the bodywork, to which the bumper then attaches to.

Fits all Beetles prior to July 1967 and 1200cc models prior to July 1973.

Sold individually.

Applications

VW Beetle Bumper Iron

This seal covers the hole around the bumper bracket in the panel on the vehicle.

For use on VW Beetles fitted with Blade Style Bumpers on the following models:

1200cc Models from the start of production to July 1973

1300cc Models from the start of production to July 1967

Also used on all Karmann Ghia`s from the start of production to July 1971.

Sold Separately.

4 Required per car.

This bracket bolts to the vehicle and protrudes out through the bodywork, to which the bumper then attaches to.

Fits all Beetles prior to July 1967 and all 1200cc models prior to July 1973.

Sold individually.

Applications

VW Beetle Bumper Iron

This little spacer reinforces the bumper at the bumper bracket mount.

 Fits between the bumper and the bracket. Sold individually.

4 are required per bumper.

Long 30mm long Beetle bumper bolt, also known as a coach bolt that attaches the bumper to the bumper bracket

Quality: Top quality 

Quantity: Sold each 

Fitment:

• 1200 models from the start of production to July 1973

• 1300 models from the start of production to July 1967

Measurements:

• 15mm long
• 1.25mm thread pitch

Applications:

VW Beetle: 1950 – 1973

This set of 8  steel bolts and washers can be used to install the bumper irons onto the body of all pre 1967 Beetles and 1200cc models with blade bumpers up to 1973

1 kit per car

Top quality stainless steel bumper originally fitted on all 1200cc models from September 1952 until August 1973 and on 1300cc models from September 1952 until August 1967

Often referred to as “blade bumper” due to the shape

Quality: Top quality stainless steel   

Fitment: Front

Shipping Surcharge: Please note that due to the length or weight of this product an extra £10 will be charged if you would like it delivered

Applications:

VW Beetle: 1953 – 1973

Top quality stainless steel rear bumper originally found on all 1200cc models from September 1952 until August 1973 and on 1300cc models from September 1952 until August 1967

Often referred to as `blade bumper` due to the shape

Quality: Top quality stainles steel

Fitment: Rear

Shipping Surcharge: Please note that due to the length or weight of this product an extra £10 will be charged if you would like it delivered

Applications:

VW Beetle: 1953 – 1967