Baywindow Bus Front Brake Bundle Kit Deluxe - 1973-79 (Disc Brakes)

Front brake disc to fit all Baywindow buses from 1973 to 1979 with a 5×112 (standard small five) stud pattern

86mm deep, 13mm thick

Quality: Good quality 

Quantity: Sold each

Applications:

VW Baywindow Van: 1973 – 1979

This replacement flexible rubber brake hose is a direct replacement for the brake hose fitted to the front of all VW Baywindow Buses from 1971 to 1979.

It is also used on the front of all 1302 and 1303 VW Beetles fitted with disc brakes.

Size:- 330mm

Fitment:- Female/Female ends

Sold each

In August 1970 VW upgraded the front brakes on all Baywindow Buses from Drum Brakes to Disc Brakes. By doing this they also changed the wheel design and the PCD.

These wheels now had a smaller stud pattern of a PCD of 112mm. Commonly know as small 5 stud.

The first design of these brakes had a small narrow brake caliper. In July 1972 they changed the design of the brake caliper, disc and brake pads which were increased in size to achieve greater braking effiency.

These replacement brake pads from TRW are for the thicker style brake calipers that run from August 192 through to July 1979. They are easily identified as they use a 14mm bolt to hold the caliper onto the spindle and not a 12mm bolt which was used on the earlier models.

These pads continued to be used on the next generation of VW Bus, The Type 25 or Wedge as it is commonly know. 

They were used in the Type 25 Bus from the start of production until July 1985.

Sold in a set of 4 brake pads to replace the pads in both front calipers.

Front left brake caliper to fit Baywindow buses from August 1972 to the end of production in 1979

Quality: Good quality  

Fitment: 55mm pad gap

Fitting: If fitting to an early T25 (up to 85) you will need to purchase a brake pipe extension (part number 251611999) and clearance the stub axle to accomodate the bleed nipple

Applications:

VW Baywindow Van: 1973 – 1979

Front right brake caliper to fit Baywindow buses from August 1972 to the end of production in 1979

Quality: Good quality  

Fitment: 55mm pad gap

Fitting: If fitting to an early T25 (up to 85) you will need to purchase a brake pipe extension (part number 251611999) and clearance the stub axle to accomodate the bleed nipple

Applications:

VW Baywindow Van: 1973 – 1979