Type 25 Brake Hose Bundle Kit - 1979-85

Keep your braking system safe and reliable with this replacement flexible front brake hose for VW Type 25 (T3) Transporter models built from the start of production until July 1985. Manufactured to OEM specifications, this high-quality rubber brake hose replaces ageing, cracked or swollen original hoses, ensuring consistent hydraulic brake pressure and dependable braking performance.

Brake hoses are a vital part of the braking system, carrying hydraulic brake fluid from the rigid brake pipes to the moving brake calipers and suspension components. Over time the rubber can deteriorate internally and externally, leading to restricted brake fluid flow, poor brake performance or dangerous leaks. Replacing old brake hoses is an important part of routine brake maintenance and is especially recommended when carrying out a brake overhaul.

This hose features female fittings at both ends and measures 405mm in length, providing a direct replacement for the original factory hose. Supplied individually, we always recommend replacing brake hoses in axle pairs to ensure even braking performance.

Features

• Direct replacement flexible front brake hose
• OEM specification fit and performance
• Female to female fittings
• High-quality rubber construction
• Resistant to brake fluid, heat and road contaminants
• Restores safe and reliable braking performance

Specifications

• Length: 405mm
• End fittings: Female / Female
• Material: Reinforced rubber
• Quantity: Sold individually

Fitting Notes

• Fits the front braking system
• We recommend replacing hoses in pairs
• Inspect brake fluid and bleed the braking system after installation
• Ideal when replacing calipers, wheel cylinders or carrying out a full brake service

Fits the following vehicles

VW Type 25 (T3)

• All 1.6–2.1 Petrol, Diesel and Waterboxer models – 1979 to July 1985

Replaces Volkswagen Part Numbers

• 251611775
• 251611775A

Rear brake hose, 200mm long, for a wide range of Volkswagen models. This flexible hose connects the rigid brake pipe to the moving rear brake assembly, allowing suspension movement while maintaining safe hydraulic brake pressure.

Brake hoses are a vital part of the braking system. As the pedal is pressed, brake fluid passes through the hose to operate the wheel cylinder or caliper. Over time, hoses can crack, swell internally, perish or corrode at the fittings, causing poor brake feel, binding brakes or fluid leaks. Replacing worn hoses helps restore safe, consistent braking performance.

This hose is used on the rear of T25/T3 models and on various rear applications across Golf, Jetta, Scirocco, Passat and Polo ranges. On Mk2 Golf applications it is used as the rear inner hose. Always compare hose length, fitting style and position before ordering.

For best results, inspect the metal brake pipes, retaining clips, calipers or wheel cylinders at the same time. As with any brake work, the system must be bled correctly after fitting and brake fluid should be renewed if contaminated or old.

Fits:
T25/T3 1980-1992 – 1.6 petrol, 1.9-2.1 petrol, 1.6-1.7 diesel bus, van and platform/chassis
Golf Mk1 1974-1984 – 1.1-1.8 petrol, 1.5-1.6 diesel hatchback
Golf Mk1 Cabriolet 1979-1983
Golf Mk2 1983-1992 – 1.0-1.8 petrol, 1.6 diesel hatchback, rear inner
Jetta Mk1 1978-1984 – 1.1-1.8 petrol, 1.5-1.6 diesel saloon
Jetta Mk2 1984-1992 – 1.3-1.8 petrol, 1.6 diesel saloon
Scirocco Mk1/Mk2 1974-1992 – 1.1-1.8 petrol
Passat B1 1973-1980 – 1.3-1.6 petrol, 1.5 diesel estate
Passat B2 1980-1988 – 1.6-2.0 petrol, 1.6 diesel hatchback
Passat B3/B4 1988-1997 – 1.6-2.8 petrol, 1.6-1.9 diesel saloon and estate
Polo Mk1/Mk2 1975-1994 – 0.9-1.3 petrol, 1.3-1.4 diesel hatchback