Beetle Adjustable Beam Bundle Kit - 1966-79 - RHD

Castor shims for T1 front beam.

Made from ultra strong aluminium these shims improve the geometry of the front beam when really lowering the car.

Long bolts must be used when using more than 1 pair of shims.

Sold in Pairs

Right hand drive adjustable lowering beam or axle to fit post 1966 vehicles with Ball Joint suspension.

These beams are brand new with adjusters welded in to give you up to 4″ of adjustment from standard.

Quality: Reproduction

Fitment: Please note this is a bare beam that does not come with torsion leaves, if required see part number 131411107A

Fitting: If running at the lowest setting we recommend fitting uprated shorter gas shocks and long travel ball joints.

Not supplied with grease nipples, if required see part number: N0185112

Measurements: 800mm wide measuring from seam to seam on the bottom of each shock tower.

Bundle Kit Available: Complete Front Beam kit with leaves, anti roll bar and all fittings available,  See part number BEAMKIT04

Applications:

VW Beetle: 1965 – 1979

VW Karmann Ghia: 1965 – 1974

VW Buggy + Baja: 1965 – 1979

Type 1 Extra Travel Ball Joint Upper.

Your front ball joints will be under a lot of strain if your car is lowered. Help ease their pain by installing these extra travel versions.

Type 1 Extra Travel Ball Joint Lower.

Your front ball joints will be under a lot of strain if your car is lowered. Help ease their pain by installing these extra travel versions.

Improve the handling of your lowered Beetle or Karmann Ghia and control body sway while preventing wheel hop under hard cornering

This heavy duty front sway bar is made from heavy 3/4″ steel which is zinc plated

Requires the use of your original clamps or we can supply stainless steel clamps (sold separately) for that complete custom fit 

Quality: Good quality 

Quantity:

• 1 x Anti roll bar
• 4 x Urethane bushes  

Fitment: Ball Joint suspension 

Fitting: Supplied with red urethane bushes

Applications:

VW Beetle: 1965 – 1979

VW Karmann Ghia: 1965 – 1974

VW Buggy + Baja: 1965 – 1979

Type 1 stainless steel anti roll bar clamps with urethane bushes for heavy duty anti roll bars as fitted on all Beetles and Karmann Ghias 

Quality: Good quality 

Quantity: Sold in sets to install 1 anti roll bar  

Fitment: They cannot be used with all standard Anti roll bars

Applications:

VW Beetle: 1949 – 1979  

VW Karmann Ghia: 1955 – 1974

VW Buggy + Baja: 1949 – 1979

Bump steer kit, most 68> requires drilling of your spindles. 

This neat little kit consists of just 2 bushes that relocate tie rod ends to the underside of the steering knuckle.

This improves the angle reducing tie rod end wear and gives needed clearance of the fuel tank which can cause a problem on extremely low cars.

Requires drilling of your stub axles.