Dashboard Switch Nut and Clutch Cable Wing Nut Tool

Handy tool made to help with undoing and tightening dashboard switches , those annoying aluminium switch nuts.

These are made for genuine switches and reproduction as it seems repro switches the makers made up their own sizes and shapes of slots .

The slotted ones are for switches that have a stalk coming out of them and the slotless ones are for hazard switches and light switches , the centre slot is so it can be used for clutch cable wing nut tightening .

In the image with various arrows it should help explain the uses .

Slotted for 12v switches that have a centre shaft coming out like wiper switches
Slotted for 6v switches as above
Slotted but flat edge this works well on the new reproduction switches, you may need to alter to suit the switches you have .

Non slotted will work on 12v 6v switches that have nothing getting in the way on the centre section.

PLEASE BE AWARE THAT YOU MAY NEED TO ALTER / TWEEK TO SUIT YOUR SWITCHES , UNFORTUNATELY NOT ALL SWITCH ESCUTCHEONS ARE THE SAME 

Quality: Good quality 

Quantity: Sold each

Applications:

VW Beetle: 1949 – 1979

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1955 – 1974

VW Type 3: 1961 – 1973

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1949 – 1979