Alternator Stand (Also Dynamo Stand) Kit - Type 1 Engines - 12 Volt

This 8mm full nut has a 1.25mm thread pitch and a 13mm head.  It can be used for various applications including:

• T1 general use nut
• 1303 74-79 ball joint clamp nut (chassis 134 2000 001)
• T1 68-79 rear anti roll bar bracket nut
• T2 Front beam steering stop nut
• T2 68-79 brake pedal to lever arm nut
• T2 68-72 bumper bolt nut
• T2 68-79 sliding door centre hinge cam nut
• T2 -67 general use nut
• T25 1600cc (CT) rocker shaft mounting block nut
• T25 camshaft pillars cylinder head nut (diesel)
• T25 silencer mount nut (diesel)
• T25 gear shift shaft plate nut
• T25 83-92 front gear shift rod to universal joint clamp nut
• T25 79-84 Nut above operating cam centre hinge sliding door
• Mark 1 Golf bumper iron nut (to metal bumper)

Square paper gasket located under the alternator or dynamo stand on either side of the oil deflector plate, 2 required.

Quality: Good quality 

Quantity: Sold each, 2 required per engine

Fitting: If you require a new oil deflector plate, see part number 113101221B

Applications: 

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1964 – 1974

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1960 – 1979

Square metal plate that sits below the alternator or dynamo stand on all 1200cc to 1600cc aircooled engines that deflects the oil back into the crankcase while the engine is running

Quality: Good quality 

Fitting: If you require new oil deflector plate gaskets, see part number 113101219, 2 required.

Applications: 

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1964 – 1974

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1960 – 1979

Standard replacement aluminium alternator or dynamo stand for Type 1, 1200cc – 1600cc aircooled engines.

These universal stands allow you to fit either an alternator or dynamo.

Quality: Good quality

Fitment: These universal stands allow you to fit either an alternator or a 105mm dynamo. Also available in a chrome finish for a dressed look, see part number AC101211

Fitting: These do NOT fit Brazilian Bays with fuel injection.

Applications:

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1960 – 1974

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1960 – 1979

This 8mm washer is 2mm thick and has an outside Diameter of 20mm.  Can be used for various applications.

PLEASE NOTE: Sizes are not exact.