Mk2 LT35 Rear Brake Disc (272mm Solid)

This replacement rear brake disc is designed specifically for VW LT Mk2 (LT II) LT35 models, covering vehicles from April 1975 through to July 2006 fitted with solid rear brake discs. Finished with a protective anti-corrosion coating, this disc provides dependable braking performance and long service life, even in demanding commercial use.

What the part does & how it works

The rear brake disc provides the friction surface for the rear disc braking system. When the brake pedal is applied, hydraulic pressure forces the rear brake caliper to clamp the brake pads against the disc. The friction created slows the wheel and helps stabilise the vehicle under braking, particularly important on heavier LT35 models.

Using the correct disc diameter and thickness is essential. A worn, warped, or incorrect disc can cause vibration, uneven pad wear, reduced braking efficiency, or caliper malfunction. This replacement disc restores the correct braking geometry and consistent stopping performance.

Specifications

• Brake disc type: Solid

• Outer diameter: 272mm

• Thickness: 16mm

• Number of holes: 5

• Surface finish: Coated (anti-corrosion protection)

• Fitting position: Rear axle

• Quantity: Sold individually

Fitment & compatibility

• Vehicle application:
  Volkswagen LT Mk2 / LT II – LT35 models

• Engines:
  2.3 Petrol, 2.5 Diesel, 2.8 Diesel

• Model years:
  April 1975 – July 2006

Important fitment note:
This rear brake disc is specific to LT35 models. LT28, LT31, and LT46 variants use different rear brake disc sizes and specifications. Always confirm disc diameter and thickness before ordering.

Fitting notes

• Supplied individually, however we strongly recommend replacing rear brake discs in pairs to maintain balanced braking and even pad wear.

• Before installation, clean both braking surfaces thoroughly with a good quality brake cleaner to remove the anti-oxidising oil applied during manufacture.

• Inspect brake pads, calipers, and hoses at the same time and replace any worn components as required.

• Correct bedding-in of new discs and pads is advised for optimum performance.

Key features

• Correct rear brake disc for LT35 Mk2 models

• Solid disc design

• 5-hole fixing

• 272mm diameter × 16mm thickness

• Coated for corrosion resistance and longevity