Price Match

Now via Live Chat

Free Shipping

When you spend over £75

Free Shipping when you spend over £75

Easy Returns

Just call for a return number

Next Day Delivery

Need it fast?

Type 25 Fuel Injector Set

As decades wore on, the fuel injectors on your van wore out. Their pintles were damaged and dirtied by debris in your fuel and fuel tank. The hose nipples were scratched, the brittle plastic ends cracked, and the flow rates drifted askew. Finally a modern replacement is now available.

In addition to their overall much more modern design, these brand new injectors adhere to a much tighter overall flow rate tolerance than the original Bosch design using multi-point dynamic flow testing. On top of that, each set of four injectors is a matched set so are within +/-1% of each other at all flow rates. This ensures that all your cylinders are getting the correct and identical amount of fuel whether you`re idling at a stoplight or standing on the accelerator to get up a hill.

The bottom line is: These injectors will provide the best possible fuel economy, power, and reliability. If your Vanagon/T25/T3 is feeling sluggish, experiencing a rough idle, or getting poor fuel economy, and a normal tune up hasn`t helped, we`d highly recommend a set of these injectors these injectors to pep up your Waterboxer.

Fit: These injectors will work with any 1983-91 water-boxer Vanagon/T25/T3, including MV and DJ engines. includes:
• (4) Brand-new fuel injectors
• (4) Quality NBR fuel line pre-installed with stainless ear clamps
• (4) Small end injector seals
• (4) Large end injector grommets

Note that the retaining ring on the body of these injectors is a bit different than on the OE part. When installing, make sure that the inner lip of the provided large end injector grommet fully seats into the injector body to hold it in place.

Caution: the Bosch-design electrical plug that this item accepts is the same as on many other components in the engine compartment, some that are close in proximity to each other. Be very careful not to mix them up! Always unplug/plug in one thing at a time whenever possible, label all plugs if more than one is to be removed, for example when replacing an engine long block, or even just the throttle body. 

Manufacturer: BBT

Availability: Special Order, please allow 21days for delivery

Unit of Measure: Set

Dimensions:

Width: 0mm

Height: 0mm

Depth: 0mm

Volume: 0mm3

Weight: 0kg

This Part Fits: Type 25

FAQs

Be the first to ask a question!