Type 25 Clutch Cables (Up to 1983)

Clutch cable to fit left hand drive Type 25 or T3 vans from May 1979 to August 1982 fitted with CT, CU and CZ engine codes

Top Quality ATE Clutch cable to fit left hand drive Type 25 or T3 vans from May 1979 to August 1982 fitted with CT, CU and CZ engine codes

Clutch cable to fit right hand drive Type 25 or T3 vans from May 1979 to August 1982 fitted with CT, CU and CZ engine codes Quality:...

Clutch cable conduit that fits Type 25 or T3 bus from May 1979 to July 1982 fitted with non hydraulic clutches Quality: Good quality Applications:...

Wing nut used to connet the clutch cable to the gearbox on all Aircooled VW`s from 1966 onwards. Can be used on earlier models if required.

This rubber boot is located on the end of the clutch cable conduit where it meets the chassis.

This 12mm washer is 3mm thick and has an outside diameter of 22mm.  It is used for various applications including: T1...

Clutch cable bracket located on the gearbox to fit all Baywindow Buses and Type 25 or T3 models up to...

Lock Washer used for the following:

Used for the cooling assembly (flaps) on VW Aircooled Type 1 engines.

Used for holding the clutch cable assembly pedal end on Type 25 Buses manufactured before 1985

Used in the accelerator pedal assembly on Baywindow buses from 1973 to 1975 (5 required)