Master Cylinders

This boot fits on the end of the master cylinder, stopping any dirt and grit from getting in and wrecking the seals, pistons and internals for use on all Beetles, Karmann Ghia, Type 3 and Splitscreen Bus

Master cylinder rubber plug with a 7mm hole for the brake reservoir feed and an outer diameter of 17mm which fits into the master cylinder.

For use on the following models:

VW Beetles from 1968 to 1971 with dual circuit brakes

Splitscreen Buses in 1967 only with dual circuit brakes

Baywindow Buses that have servo assisted brakes.

Mk 1 Golf`s inlcuding Hatchback and Cabriolet models.

Plastic pipe that fits into the brake master cylinder.

This rubber bung is used on all Beetle master cylinders from August 1971 onwards and all VW Baywindow vans from...

Plastic feed pipe which is found on the top of the master cylinder on all Beetles from August 1971 until...

Gasket between master & servo. For use on all Volkswagen Baywindow Buses with Brake servos fitted. Sold Separately

This metal plug can be used to block off any threaded holes in your master cylinder that are not required...

Billet master cylinder reservoir is for use on all VW Splitscreen Buses with single circuit master cylinders

T1 Master Cylinder Bolt

Circlip, brake pushrod