Gearbox Seals

Gearbox radial shaft seal for use on the gear selector shaft on all Mk1 Golf`s with 4 or 5 speed manual gearboxes.

8mm high

18mm inner diameter

30mm outer diamater

3 piece Gearbox nose cone repair kit, suitable for most models from 1968.

Shift rod seal or gearbox nose cone seal, that fits at the front of the gearbox nosecone on most VW models

Oil sump rubber gasket for automatic gearboxes as fitted to Baywindow Buses from August 1975 onwards and all Type 25 Buses and Mk1 Golfs.

For use on 3 speed automatic 003 gearboxes.

Clutch guide rod housing oil seal for use on Mk1 Golf`s with 1.5 Petrol (FH), 1.6 Petrol (EC,EG,FP), 1.5 Diesel (CK) and 1.6 Diesel (CR,JK,CY) engines.

Gearbox input shaft oil seal for use on all 4 and 5 speed gearboxes in Mk1 Golf`s from the start to end of production including both Hatchback and Cabriolet models.

40mm outer diameter

22mm inner diameter

8mm thick

Replacement seal for the centre of the flange on all IRS gearboxes fitted to Beetles, Type 3`sand Karmann Ghia`s.

Also used on Transporter T4 Buses from March 1994 onwards with manual gearboxes and all MK1 Golf`s

40mm OD

Replacement oil filter (strainer) to fit automatic gearboxes fitted into Baywindow Buses from 1976 onwards, Type 25 (T3) Buses and Mk1 Golf`s.

Replacement gasket and filter kit for use on Baywindow Buses from 1976 onwards with either NE or NF gearbox codes, all Type 25 (T3) Buses fitted with 009 automatic gearboxes and all Mk1 Golf`s.

Gearbox drive flange seal as fitted to most Mk1 Golf`s, Mk2 Golf`s, Caddy`s, Corrado`s, Scirocco`s, Mk3 Golf`s, Jetta`s and Vento`s.