Baywindow Gear Shift Rods and Linkage

Gear shifter plate that sits under a standard gear lever on all Beetles, Buses and Type 3 Variants. It stops you accessing reverse gear unless you press down on the shifter

Gearshift coupling screw that attaches the gearshift coupling to the gearshift rod on all aircooled VW`s except Type 25 Buses.

Also used on Mk1 Golf`s in the bottom of the shift finger to attach it to the selector rod guide. 

Inlcudes a hole in the square end for fitting a retaining wire.

M8 x 14mm long

Replacement gearshift coupler for all beetles from 1965-1979 and buses from 1968-1979. Essential to eliminate sloppy and grinding gear changes.

Gear Shifter Coupling Top Quality

Billet aluminium gear shift coupling which joins the shift rod to the nosecone of the gearbox on all VW Beetles, Karmann Ghia`s and Type 3`s from 1963 onwards, all years of VW Type 181 and all years of Baywindow Buses.

These urethane shift rod couplings allow the harder material a more accurate shift. The urethane bearings sit backlash-free in a...

If you`re suffering from sloppy gear shifting, the first port of call would be to check all your gear shift bushes and the coupling at the rear of the bus

If you`re suffering from sloppy gear shifting, the first port of call would be to check all your gear shift bushes and the coupling at the rear of the bus

Front and rear gear shift rod boot to fit all year Baywindow buses    Quality: Genuine Volkswagen  Quantity: Sold each, 2...

Good quality front shift rod to fit early Baywindow buses from 1968 - 1973