**NLA** Beetle Vintage Speed Abarth Style Exhaust - 1950-55 - Type 1 Engines (Not 1200cc)

The Abarth exhaust was an original aftermarket accessorry for the 25HP and 30HP Beetle.  It features 4 pea shooter tailpipes that exit out of the cut outs in the rear valance.

This Abarth Style exhaust is manufactured from stainless steel by Vintage Speed.

Designed to be used on Beetles Pre 1955 Beetles fitted with 1300cc, 1500cc or 1600cc engines.  These Beetles would have originally had a 25HP Exhaust installed.  The rear valance on these early Beetles differs from other models as the tail pipes sweep under the rear valance and it does not have the traditonal exhaust cut outs.

So if you have installed a larger engine in your early Oval or Splitwindow Beetle and still retain your original rear valance then this is the exhaust you need for that tradional Abarth exhaust look!

This special narrowed version allows the engine to be removed from the car much easier with the exhaust still bolted on.

For use with engines running twin carburettors that do not require pre heat pipes.  If you are running your original single carburettor set up and require weld on pre heat pipe flanges then please see part number: VS15521245100PH

Features:

• For use on Early Beetles with 1300cc, 1500cc or 1600cc Type 1 engines without the rear valance cut outs.
• Narrowed Muffler for easy engine removal.
• Adjustable flanges (+/-4mm)
• Built in M18x1.5 nuts for Lamda sensor when turning twin carburettors.
• Gaskets and bolts included (Heat exchanger clamps sold separately)