Type 25 Front Brake Bundle Kit - 1979-85

This solid front brake disc is a good quality replacement designed to fit all VW Type 25 (T3) models produced from 1979 to June 1986. Featuring a 5×112 PCD (pitch circle diameter) stud pattern, this disc is a direct match for the factory-installed front brake setup used on early T3 buses.

With a robust 278mm outer diameter and a disc thickness of 13mm, this solid rotor is designed for vehicles not fitted with vented front discs. It delivers reliable braking performance and longevity, making it ideal for maintenance, repair, or restoration projects.

Sold individually, you will need two discs to service both sides of the front axle. Always replace discs in pairs and check pad condition at the same time.

Key Features:

• Solid disc for early VW T3 / Type 25 models

• 278mm outer diameter, 13mm thickness

• 5×112 stud pattern

• Direct replacement for original front discs

• Durable construction for consistent, dependable braking

• Good quality aftermarket part

Applications:

• VW Type 25 / T3: 1979 – June 1986

Installation Tip:
Confirm your vehicle uses solid (not vented) discs before ordering. Always pair with new brake pads and check caliper function during installation.

These replacement front brake pads are specifically designed for the late-style brake calipers fitted to Volkswagen Baywindow Buses from August 1972 to July 1979 and the Type 25 (T3/Wedge) Bus from 1979 to July 1985. As part of VW’s braking upgrade in mid-1972, these calipers feature a thicker and more robust design than their predecessors, significantly improving braking performance and safety.

This later brake system is easily identified by the use of 14mm bolts securing the caliper to the spindle, as opposed to the 12mm bolts found in earlier (1970–July 1972) models. These late calipers also accommodate larger brake discs and pads, making this pad set incompatible with early-style setups.

Each set includes four brake pads—enough to replace the friction material on both front calipers. With a 55mm pad gap, they ensure full compatibility with the larger caliper design, delivering excellent braking efficiency and reliable stopping power under all driving conditions.

Whether you`re restoring a late Baywindow Bus or maintaining your classic Type 25, these pads provide the fit, function, and confidence you`d expect from a properly specced replacement.

Applications:

• VW Baywindow Bus: August 1972 – July 1979

• VW Type 25 / T3 / Wedge Bus: 1979 – July 1985

Specifications:

• Brake Pad Style: Late caliper type (post-August 1972)

• Caliper Bolt Size: 14mm

• Pad Gap: 55mm

• Quantity: Set of 4 (for both front calipers)

• Fitment: Only for late-style calipers – check bolt size and caliper design before ordering

Note: These pads will not fit early Baywindow models with the smaller calipers and 12mm bolts (1970–July 1972). Always verify caliper type before purchase.