Beetle Adjustable Beam Bundle Kit - 1950-65 - LHD

This spring washer is used for any 10mm bolt including axle and engine bolts.

Size 10x21x1

King and Link Pin beam mounting bolt lock plates to fit all pre 1965 Beetles and Karmann Ghia

Quality: Good quality 

Quantity: 1 x pair 

Fitment: King and Link pin front beams 

Applications:

VW Beetle: 1949 – 1965 

VW Karmann Ghia: 1955 – 1965

VW Buggy + Baja: 1949 – 1965

Left hand drive adjustable lowering beam or axle to fit pre 1965 vehicles with King + Link Pin suspension

These beams are brand new with adjusters welded in to give you up to 4″ of adjustment from standard.

Quality: Reproduction

Fitment: Please note this is a bare beam that does not come with torsion leaves, if required see part number 111411027

Fitting: If running at the lowest setting we recommend fitting uprated shorter gas shocks

These beams use 8mm straight grease nipples, see related products if required.

Measurements: 762mm wide

Bundle Kit Available: Complete Front Beam kit with leaves, anti roll bar and all fittings available,  See part number BEAMKIT01

Applications:

VW Beetle: 1949 – 1965

VW Karmann Ghia: 1955 – 1965

VW Buggy + Baja: 1949 – 1965

Improve the handling of your lowered Beetle or Karmann Ghia and control body sway while preventing wheel hop under hard cornering

This heavy duty front sway bar is made from heavy 3/4″ steel which is zinc plated

Requires the use of your original clamps or we can supply stainless steel clamps (sold separately) for that complete custom fit 

Quality: Good quality 

Quantity:

• 1 x Anti roll bar
• 4 x Urethane bushes  

Fitment: Link pin suspension 

Fitting: Supplied with red urethane bushes

Applications:

VW Beetle: 1949 – 1965 

VW Karmann Ghia: 1955 – 1965 

VW Buggy + Baja: 1955 – 1965

Type 1 stainless steel anti roll bar clamps with urethane bushes for heavy duty anti roll bars as fitted on all Beetles and Karmann Ghias 

Quality: Good quality 

Quantity: Sold in sets to install 1 anti roll bar  

Fitment: They cannot be used with all standard Anti roll bars

Applications:

VW Beetle: 1949 – 1979  

VW Karmann Ghia: 1955 – 1974

VW Buggy + Baja: 1949 – 1979

Front torsion arm seal to fit all Beetles and Karmann Ghias up to 1964 that have King and Link Pin suspension

Seals between the torsion arm and the front beam or axle 

Quality: Good quality 

Quantity: Sold each, 4 required per front beam

Applications:

VW Beetle: 1949 – 1964

VW Karmann Ghia: 1955 – 1964

VW Buggy + Baja: 1949 – 1964

Standard new replacement front torsion leave set for Beetles and Karmann Ghias up to 1966 that have King + Link Pin suspension

Quality: Top quality reproduction

Quantity: Sold in 2 sets, enough for one front beam, both upper and lower tubes.

945mm in length

Applications:

VW Beetle: 1955 – 1966

VW Karmann Ghia: 1955 – 1966

VW Buggy + Baja: 1955 – 1966

Torsion arm grub screw that retains the torsion arms onto the ends of the leaves and is also used in the centre of the beam to retain the leaves in a fixed position on the front axle of  Beetles, Karmann Ghia, Type 3, Baywindow and Splitscreen Buses

Quality: Good quality 

Quantity: Sold each

Applications:

VW Beetle: 1949 – 1979

VW Splitscreen Van: 1950 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1955 – 1974

VW Type 3: 1961 – 1973

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1949 – 1979

Torsion arm grub screw nut that retains the torsion arm grub screw onto the ends of the leaves and is also used in the centre of the beam to retain the leaves in a fixed position on the front axle of  Beetles, Karmann Ghia, Type 3, Baywindow and Splitscreen Buses

Quality: Good quality 

Quantity: Sold each

Measurements: This 14mm Nut has a 1.5mm thread pitch and a 19mm head

Applications:

VW Beetle: 1949 – 1979

VW Splitscreen Van: 1950 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1955 – 1974

VW Type 3: 1961 – 1973

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1949 – 1979

Beetle front beam fixing plate that is located on top of the beam and mounts the beam to the body

Quality: Good quality

Quantity: Sold each

Fitting: Rubber pads sold separately, see related products

Applications:

VW Beetle: 1960 – 1979 

VW Buggy + Baja: 1960 – 1979

Rubber shock pad for the upper side of the body to front beam mount on Beetles, Karmann Ghia and Buggies

These have the raised edges for the metal mounting plate to sit in 

Quality: Good quality reproduction 

Quantity: Sold each, 1 for each side, 2 required per car

Fitment: Not for 1302 or 1303 models

Measurements: 10mm thick with a 15mm hole

Applications:

VW Beetle: 1960 – 1979 

VW Karmann Ghia: 1960 – 1974 

VW Buggy + Baja: 1960 – 1979

This 12mm bolt is 90mm long, has a 19mm head and has a 1.5mm thread pitch.  This bolt has a tensile strength of 8.8.  It can be used for various applications including:

• Beetle front beam bolt (4 required)
• Karmann Ghia front beam bolt (4 required)
• 1302 and 1303 upper shock bolt
• Baywindow Bus lower shock bolt

This 10mm Bolt is 25mm Long, with a 17mm head and a 1.5mm thread pitch.  This bolt has a tensile strength of 8.8.  It is used for various applications including:

• T1 Front Beam Vertical Bolt
• T1 chassis lower rear mount bolt (above torsion tube)
• T1 -71 chassis upper rear mount bolt (inner arch)

Fully Threaded Bolt (Set Screw)