Type 25 Shift Rod Lever with Ball and Cup Kit - 1983-92 - Petrol

Spring pin for the gear shifter selector lever on all Type 25 Buses.

Gear Shift Linkage Bellows that covers the ball (relay lever) and socket on the side of the gearbox.

Fits all 5 speed boxes and all but the very early 4 speed boxes.

Sold each.

Replacement gear shift lever joint with ball for use on all Type 25 Buses from August 1982 onwards.

This part is critical for good gear shifting and must be in good order.

If your original is worn then replace it now.

This gearbox selector shaft boot is designed to fit over the manual gearbox selector shaft, providing an essential protective barrier between the gearbox linkage and the outside environment. Its primary function is to shield the selector shaft and linkage components from dirt, grit, water, and road debris that can otherwise enter the gearbox area and cause accelerated wear or stiff gear selection.

The selector shaft moves every time a gear is selected, and without a proper protective boot, contaminants can build up around the shaft and linkage. This can lead to increased friction, poor gear engagement, and premature wear of bushes and seals. By maintaining a clean operating environment, this boot helps preserve smooth and precise gear changes and extends the service life of critical gearbox components.

Manufactured from durable, flexible rubber, this boot is designed to withstand constant movement, temperature changes, and exposure to oil and road grime. The flexible construction allows full selector shaft movement without restricting gear selection, while maintaining a tight fit to keep contaminants out.

This selector shaft boot is commonly used on early Volkswagen manual gearboxes fitted to both front-engined and rear-engined models. When replacing the boot, it is recommended to inspect the selector shaft seal and linkage bushes at the same time, as worn components can compromise the effectiveness of the new boot. Replacing these items together ensures long-term reliability and smooth gearbox operation.

Vehicle Compatibility

• VW T25 / T3: 1980–1992

• VW Golf Mk1: 1975–1981

• VW Golf Mk1 Cabriolet: 1979–1981

• VW Caddy Mk1: 1983–1985

• VW Scirocco: 1974–1981

This gear shift selection lever is a direct replacement for the original selector lever fitted to petrol-engined VW T25/T3 Transporters from 1980 to 1992. The selector lever is a key part of the gear-shift mechanism, translating movement from the gear stick to the shift linkage under the vehicle. A worn or damaged lever can cause excessive play, vague gear selection, difficulty engaging gears or a notchy shift feel.

Manufactured to OEM-style dimensions, including the correct 94mm height, this lever restores the precise shift action intended by the factory. It installs directly into the existing linkage without modification and is suitable for all standard petrol gear-shift setups used during the T25/T3 production run.

Replacing this part is often done alongside bush kits, link rods or ball joints to fully refresh the gear-change system, especially on high-mileage vans where multiple components have aged.

Fitment:
• VW T25 / T3 Transporter
• Petrol models only
• Model years: 1980–1992
• Height: 94mm