This tool is designed to enable you to adjust your tappets with the greatest of ease.

Hire this tool for £10.50.

A £5.00 delivery charge will be added at checkout (NON REFUNDABLE)

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £10.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

Mr Torque kit.

This tool allows you to undo your 36mm hub nut or flywheel nut with ease.

Simple to use just divide the amount of torque required by 9 and set you torque wrench to this number.  So to torque a rear hub nut to 250 ft lb all you need to do is set your torque wrench to 29 ft lb.

This tool can save you time and money as only a small torque wrench is required to do the highest of torque settings.

Can be used on all 36mm nuts fitted to all VW Beetle rear axles and pre 1963 Splitscreen Buses.  It can also be used on later splitscreen Buses if they are fitted with a Beetle rear hub assembly.

It can also be used on the main flywheel gland nut fitted to all aircooled engines.

Hire this tool for £19.50.

A £10.00 delivery charge will be added at checkout (NON REFUNDABLE)

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £19.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

Aids the removal of the oil pistons underneath the engine block. Removes seized oil pressure pistons.

Hire this tool for £6.50.

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £6.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

Used for setting correct valve geometry on performance engines.

Hire this adjustable pushrod tool for £4.50.

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £4.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

Tool, crankcase splitter. Simply insert into the oil pump apperture and turn the nut to seperate the case halves

Hire this tool for £3.50.

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £3.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

Used to measure the end play on a VW crank, feeler gauges also needed.

Hire this tool for £4.50.

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £4.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

Crankshaft Gear puller for Type 1 Engines

Hire this crankshaft gear puller for £10.50.

A £5.00 delivery charge will be added at checkout (NON REFUNDABLE)

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £12.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

It is vitally important not to damage your rear main oil seal when installing it. This press is a safe and easy way to do the job. Deluxe version, it has a bolt through the centre of the disc which screws into the engine to maintain even pressure at every point on the seal.

Hire this tool for £7.50.

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £7.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

This compression tester kit comes complete with a large, easy to read 2 1/2" dial face with accurate Bourdon tube meter movement.

Crankshaft pulley puller tool allows removal of the crankshaft pulley without causing any damage or warping

Hire this tool for £5.50

Quality: Reproduction

Fitment: For use on all aircooled engines and can be used when the engine is installed.

Not suitable for counterweight and extra thick pulleys.

Tool Hire: Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £5.50.

Tool Hire Terms and Conditions:

• The tool must be returned in a clean and useable condition.
• The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period.
•  Please contact us before returning the tool and we will supply you with a return reference number.
• In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.
• If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

Applications:

VW Beetle: 1950 - 1979

VW Splitscreen Van: 1950 - 1967

VW Baywindow Van: 1968 - 1979

VW Karmann Ghia: 1955 - 1974

VW Type 3: 1961 - 1973

VW Trekker: 1968 - 1983

VW Buggy + Baja: 1950 - 1979

This is a must for any VW engine builder. It allows you to remove and install valves quick and easy. Bolts to a work bench for easy use.

Please Note - Hardware & Tube extender are not included.

Hire this tool for £10.50.

There Is a £10 delivery charge added at checkout for this tool hire. (NON REFUNDABLE)

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £10.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

Measures combustion chamber capacity. Supplied with a syringe and three colour-coded plexi-glass discs to fit most bore sizes.

Hire this tool for £5.50.

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £5.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

Used to measure the distance from the top of the piston to the top of the cylinder. This is required when calculating the compression.

Hire this tool for £9.50

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £9.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

The eezilap valve lapper converts rotary drill to oscillating action/grinding motion. It fits to all power drills with normal 5/16" (8mm) chuck and laps valves in double quick time. Produces gas tight seals in seconds and the 22/28mm sucker heads fit most valves. Essential for saving on multi-valve engines.

Hire this tool for £10.50.

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £10.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

A brilliant tool for removing the distributor drive shaft once it has been dropped in to the engine case.

Hire this tool for £7.50.

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £7.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

Designed to remove the nut which holds the standard oil filler to the generator stand.

Hire this tool for £5.50.

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £5.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

Time saving constant tension hose clamp tool.

Three eigth drive.

Jaw opening 40mm

Hire this tool for £5.00.

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £5.00.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

Allows the easy removal of the starter bush situated in the bell housing of all VW's (12v only).

Hire this tool for £14.50.

A £5.00 delivery charge will be added at checkout (NON REFUNDABLE)

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £14.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

Brake pipe bending tool, this is a very good hand held pipe bending tool, simply place the pipe on the suitable size wheel and bend away! No clamping required simply bend until the correct shape is accomplished.

Note: Instructions included but these may be in a foreign language, but there are images too.

Hire this tool for £8.50.

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £8.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

Mr Torque kit.

This tool allows you to undo your 36mm hub nut or flywheel nut with ease.

Simple to use just divide the amount of torque required by 9 and set you torque wrench to this number.  So to torque a rear hub nut to 250 ft lb all you need to do is set your torque wrench to 29 ft lb.

This tool can save you time and money as only a small torque wrench is required to do the highest of torque settings.

Can be used on all 36mm nuts fitted to all VW Beetle rear axles and pre 1963 Splitscreen Buses.  It can also be used on later splitscreen Buses if they are fitted with a Beetle rear hub assembly.

It can also be used on the main flywheel gland nut fitted to all aircooled engines.

Hire this tool for £19.50.

A £10.00 delivery charge will be added at checkout (NON REFUNDABLE)

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £19.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

Aftermarket spring plate removal tool. A handy tool for taking the tension from the spring plate when removing and fitting spring plates.

Hire this springplate remover for £9.50.

A £5.00 delivery charge will be added at checkout (NON REFUNDABLE)

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £9.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

A brilliant tool for removing the hinge pins on VW Beetles and split screen vans

Hire this tool for £28.50

Please note you will be charged full retail for this product at the checkout (£120). Once you have used the tool, return it to us in a clean and reusable condition (within 10 days of invoice date) and we will refund you the full retail cost less £28.50. Additional hire will be charged at a rate of £2.50 per day until returned.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

These Hog Ring pliers are complete with automatic feed, which makes them ideal for continuous connections with a single handed operation.

The preformed strips of 50 Hog Rings (Size 07) feed easily into the tool making it deal for fencing /bird pens /sealing bags/fixing tags to plants/ re-upholstery plus numerous other uses in construction /industrial /plant nurseries/ upholstery and Classic cars etc.

Galvanised Hog Rings available separately Sizes: 17.4mm>7mm closed.

Compatible with C Ring G616 and 16G

Hire this tool for £6.50.

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £6.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

Pertronix Quick Change Ratchet Crimp Kit

Designed with all the dies required to crimp the terminals onto the end of your HT leads.

Hire this tool for £27.50.

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £27.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

This 6 piece tool set enables quick, tooless die changes.

Included are five dies for 5 common automotive solderless terminal types; Non Insulated terminals, Insulated terminals, D-Sub Terminals, Open Barrel terminals and Spark Plug Terminals (One Tool for many uses).

The adjustable ratcheting mechanism makes uniform precision crimps every time.

FEATURES

• Quick Change dies. No tools required!
• Hardened Die sets are zinc plated Chrome-Moly for extra long life
• Ratchet crimp mechansim makes precision uniform crimps every time
• Rugged carbon steel tool body with corrosion resistant black oxide finish
• Ergonomic non slip over-molded rubber grip
• Ambidextrous Design
• Blow molded plastic case for tool storage

Pertronix Spark Plug Wire Stripping Tool Hire.

This easy to use tool drastically simplifies the process of making your own spark plug wire sets.

Hire this tool for £5.00.

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £27.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.

Quickly and safely cut the spark plug wire jacket away from the conductor without damaging the core.

Works with most 7mm and 8mm wire types.

This Laser 2380 Professional Ratchet Crimping Pliers have a ratchet motion which assures complete crimping.

• Interchangeable Jaws
• For Insulated and non-insulated terminals
• PVC Soft Grip
• Forged Jaws

Hire this tool for £10.50.

Please note you will be charged full retail for this product at the checkout. Once you have used the tool, return it to us in a clean and reusable condition (within 45 days of invoice date) and we will refund you the full retail cost less £10.50.

Terms and conditions:

The tool must be returned in a clean and useable condition.

The return postage is the renters responsibilty and must be recieved back to us within the 45 day rental period. Please contact us before returning the tool and we will supply you with a return reference number..

In the event the tool breaks during use, we'll happily replace it, but we MUST receive the tool back first to determine the fault, contact us for a return number.

If you feel the tool has turned it's last nut or pulled it's final gear, give us a call and discuss before returning.

All rented tools are used at your own risk, Cool Air will not accept responsibilty for damage to vehicles or personal injury.