Beetle Black Tinware Kit - Twin Port Type 1 Engines - Without Air Outlets

Standard phillips or crosshead 6mm tinware screw to fit all aircooled engined VW`s

Quality: Good quality 

Quantity: Sold each    

Measurements: 12mm long, 1mm fine thread

Applications:

VW Beetle: 1949 – 1979

VW Splitscreen Van: 1950 – 1967

VW Baywindow Van: 1968 – 1979

VW Type 25 or T3 Van: 1979 – 1983

VW Karmann Ghia: 1955 – 1974

VW Type 3: 1961 – 1973

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1949 – 1979

Black 3 piece lower tinware set for all vehicles from 1959 – 1979.

These 3 pieces of tinware fit on all type one based engines between the engine case and cylinder heads below the push rod tubes, protecting the tubes and aid the cooling of the air cooled engine

Quality: Good quality reproduction 

Quantity: 3 piece kit

Fitment: NOT for 1200cc

Applications:

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1960 – 1974

VW Trekker: 1960 – 1983

VW Buggy + Baja: 1960 – 1979

Black Twin Port 36hp style (rounded top) fanshroud without air holes for vehicles that do not require heating or have no heat exchangers fitted to fit 1300cc, 1500cc and 1600cc engines

Quality: Reproduction

Quantity: Sold each 

Fitment: Twin Port Engines

Fitting: Drilling required for the accelerator cable

Applications:

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1960 – 1974

VW Buggy + Baja: 1960 – 1979

These two pieces of tinware and seal are located on the back of the fanshroud of all 1300cc and 1600cc twin port VW Aircooled engines found on Beetles, Karmann Ghia Splitscreen and Baywindow Buses

This tinware fits to the back of the fan shroud as an exhaust for the hot air once it has passed through the oil cooler 

Quality: Good quality

Quantity: 3 piece kit

Fitment: Twin port engines

Applications:

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1960 – 1974

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1960 – 1979

This VW Air-cooled engine tinware is located either side of the engine over the barrels and the cylinder heads.

They are designed to channel the air from the fan inside the fanshroud over the barrels and cylinder heads helping to cool them down.

These cylinder head shrouds are sold as a pair and are for use on all 1300cc and 1600cc Twin Port engines.

Finished in Black ready to paint.

Not suitable for single port engines.

Replacement tin over gearbox for Beetles, Karmann Ghia, Early Baywindow, Trekker and Buggies in black to fit twin port engines only (no doghouse) 

Quality: Reproduction

Quantity: Sold each 

Fitment: Twin port engines

Applications:

VW Beetle: 1949 – 1979

VW Splitscreen Van: 1950 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1955 – 1974

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1949 – 1979

Plain black tinware that sits over the exhaust that does NOT have air holes for the heater hose or cutouts for the pre-heat pipes, found on all year Beetles

Quality: Reproduction

Quantity: Sold each 

Finish: Black 

Fitment: Although the profile is slightly diferent from the original it can also be used on all Splitscreen Buses and Early Baywindow Buses that have a removable rear valance (1968 to 1972)

This product will NOT fit 1973 to 1979 Baywindow Buses

Applications:

VW Beetle: 1949 – 1979

VW Splitscreen Van: 1950 – 1967

VW Baywindow Van: 1968 – 1972

VW Karmann Ghia: 1955 – 1974

Black tinware known as a “breast plate” that fits behind the lower crankshaft pulley for all Type 1 aircooled engines except for late Baywindow vans from 1972 on that have a fixed rear valance

Quality: Reproduction

Fitting: Crankshaft pulley will need removing to fit

Fitment: If you require the Late Baywindow version, please see part number 113119533N

Finish: Black

Applications:

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Karmann Ghia: 1960 – 1974

VW Buggy + Baja: 1960 – 1979