These complete air suspension kits from Airkweld can be fitted to any Beetle, Type 181 or Karmann Ghia.  Once fitted the suspension on your car will be able to raise and lower at the touch of a button.

Each kit consists of two parts.  The front section is just a bolt on kit that require no welding or special tools.  The rear kit does however require welding of brackets onto your car.  This can be done with the body still on the car although it is much easier to fit the rear kit with the body seperate from the chassis.

There is 2 different air management kits available.

All kits will come with the same base parts but the valving will change in each kit. Each kit will come with a Viair 280 Compressor that is 12v, a 2 gallon tank, an adjustable pressure switch along with a 12v relay and harness, a hardware pack and 1/4" fitting pack, 100 feet of 1/4" hose.

Now on to the valving. Your basic 4 valve kit comes standard in each kit, , This will allow you to lift the front of the vehicle up and down as well as lift the rear up and down, as well as lift each wheel individually. This will give the car great handling characteristics. This is also a manual valve, air goes in as you lift the toggle up and when you depress the toggle, air comes out. This kit is outfitted with a dual need gauges to monitor pressures.

Next is the High end Electric 4 valve kit. This is the "Mac-Daddy" kit. Nothing kewler or higher end than this, period. Very similar to the 4 valve kit, only 100 years advanced. 4 electrically activated valves, GM wiring plugs with slip fit connectors