Type 1 94mm Raised Roof Aluminium Crankcase - 8mm Studs - 86mm Clearanced

Part Number: AC1010454

£1499.50 inc. VAT

In Stock in Europe 14-21 Day Delivery

Description
Specs

Type 1, raised roof aluminium crankcase bored to accept 94mm barrels (1914cc +) with 8mm case studs and pre clearanced to accept 86mm stroker crankshafts

All crankcases are made from high quality aluminium alloy and are fully CNC machined following strict quality control standards

These cases weigh approximately 41 to 44lbs
Made from high quality aluminium with numerous design features
Dual by-pass design for Type 1, 2 or 3 applications
Shuffle Pins for a snug fit, zero gap and longevity
Bubble or raised roof design with a strong radius design adding strength and allowing additional clearance for up to an 86mm crank
Filled in (not welded) support behind #3 cylinder
Drilled and tapped for full flow with plugs supplied
Main oil gallery tapped for ease of cleaning
Supplied with 8mm steel case savers
Modification to fan house required

Quality: Good quality

Special Order: Please call for lead time

Applications:

VW Beetle: 1960 – 1979

VW Splitscreen Van: 1960 – 1967

VW Baywindow Van: 1968 – 1979

VW Karmann Ghia: 1960 – 1974

VW Type 3: 1961 – 1973

VW Trekker: 1968 – 1983

VW Buggy + Baja: 1960 – 1979

Manufacturer: Auto Linea

Availability: Special Order, please call

Unit of Measure: Each

Dimensions:

Width: 390mm

Height: 420mm

Depth: 330mm

Volume: 54054000mm³

Weight: 10kg

This Part Fits: Beetle, Karmann Ghia, Baywindow, Splitscreen, Trekker, Type 3, Buggy,

FAQs

In the description it says pre clearanced to accept 86mm stroker crankshaft!! Then a little further on says.. Bubble or raised roof design with a strong radius design adding strength and allowing additional clearance for up to an 86mm crank. So would I be able to fit my 78mm crankshaft also does it come with 10mm case studs please Many thanks James

These are available only with 8mm case stud inserts and therefore 8mm case studs must be used. On the smaller 90.5mm bore then a 10mm case stud can also be used. But on the 94mm bore there is not enough room for the larger stud. Your 78mm crankshaft should go in without any clearance issues. Larger cranks up to 86mm can be used in this crankcase but extra clearancing may be required depending on what con rods you are using as some brands have very large bolts which can cause clearance issues. On larger cranks we always recommend using 'Chevy Journal' cranks and con rods to give extra room for rotation inside the crankcase.

Morning A quick question do you have this part Part Number: AC1010454 in stock please Thank you

We do not stock these crankcases and just get them in to order. Delivery is normally around 3 weeks from the point of order.

Type 1 94mm Raised Roof Aluminium Crankcase - 8mm Studs - 86mm Clearanced

Email me when this product is available

FAQs